Hydrophilic active agent UV-1000
- The hydrophilic active agent is mainly tetrafunctional waterborne polyester acrylic synthetic resin. The resin has high solid content, slightly hard overall, fast curing speed and good surface drying effect. It has good adhesion to wood and paper surfaces.
- Non-polluting, low odor, low toxicity, non-combustible
- It can be used with water, initiator, auxiliaries, etc. alone, or with aqueous or oily monomers or resins according to performance requirements, and used with initiators and auxiliaries;
- The product surface tension, the formula needs to add a certain content of wetting agent to reduce the tension, the construction process if the reference water or ethanol use, need to use infrared drying before construction, otherwise the adhesion, surface performance decline, fogging and other phenomena.
Typical features
- High hardness, good transparency, high gloss, good film formation, fast curing speed
- Strong dilution and dissolution ability, full of paint film
- Low viscosity, good water solubility and dilutability
- Good compatibility, low VOC
- Good adhesion to wood and paper
- Good alcohol resistance
- Good water solubility and dilutability
- Good wettability and sandability for pigments
Product Use
- UV ink type
Quality Indicators
| Item | Indicators |
| Active ingredient(%) | 98±1 |
| Viscosity(mPa.s) | 100~500 |
| PH at25℃ | 7.0-8.0 |
| Appearance | Light yellow transparent liquid |
| Glass transition temperature Tg, ℃ | 60 |
| Boiling point ℃ | 120 |
| Flash point(℃) | 160 |
| Density | 1.15g/mm³ |
| Hardness | 2H |
How to use
A: Printing water-based UV-free varnish (paper, film type)
| NO. | Raw materials | Percentage % |
| 1 | Hydrophilic active agent UV-1000 | 10-15 |
| 2 | UV-32X55 | 65-20 |
| 3 | leveling agent | 0.5 |
| 4 | wetting agent | 0.5 |
| 5 | Defoamer | 0.3-0.5 |
| 6 | Anti-wear agent | 0.5-1 |
| 7 | Waterborne activated amines | 4-6 |
| 8 | Initiator | 2-5 |
| 9 | Deionized water | 5-10 |
| Total | 100 |
- Glossiness:85°以上(60°GU)
- Flexibility: folded without bursting the edge
- Abrasion resistance: 400-600 times (five-color test cardboard with oil and A4 paper 4 pounds of pressure on the grinding)
- Hardening speed:40-80m/min(UV lamp energy 80mJ /cm² or more)
B: Water-based UV-LED varnish
| NO. | Raw materials | Percentage % |
| 1 | Hydrophilic active agent UV-1000 | 30 |
| 2 | UV-32X55 | 50 |
| 3 | leveling agent | 0.5 |
| 4 | wetting agent | 0.5 |
| 5 | Defoamer | 0.3-0.5 |
| 6 | Anti-wear agent | 0.5-1 |
| 7 | Waterborne activated amines | 6-10 |
| 8 | Initiator | 1-5 |
| Total | 100 |
- Glossiness:85°以上(60°GU)
- Flexibility: folded without bursting the edge
- Abrasion resistance: 400-600 times (five-color test cardboard with oil and A4 paper 4 pounds of pressure on the grinding)
- Curing speed:40-80m/min(LCD波长385)
C: Spraying water-based UV top coat (plastic type)
| NO. | Raw materials | Percentage % |
| 1 | Hydrophilic active agent UV-1000 | 15 |
| 2 | UV-32X55 | 25 |
| 3 | Water-based UV resin | 30 |
| 4 | leveling agent | 0.5-1 |
| 5 | wetting agent | 0.5-1 |
| 6 | Defoamer | 0.3-0.5 |
| 7 | Anti-wear agent | 0.5-1 |
| 8 | Waterborne activated amines | 1-2 |
| 9 | Initiator | 25 |
| 10 | Deionized water | 35 |
| Total | 100 |
- Hardness:6H
- Alcohol wipe resistant
- Construction conditions: Cross spraying once
- Drying conditions: 60 degrees baking 10-15 minutes UV lamp energy 100-300mJ/cm² or more
Package specification
- Specification：200g / 500g / 5kg / 20kg
- This product is not dangerous goods, and can be transported as general cargo.
Storage conditions
- Protected from exposure, rain and high temperature
- Products should be stored in airtight containers, avoid freezing and high temperature
- Whenever possible, it should be used within ten months
- The recommended normal storage temperature is 10-35℃
