Mask formula manufacturing process conceptualization

As the core category of the skin care market, functionally, the most direct and basic role of the mask is to moisturize and hydrate. In addition, masks also have the role of cleaning the skin and nourishing the skin. In recent years, as consumers’ requirements for skincare products continue to rise, functional masks have also emerged.

The role and mechanism of facial masks:

• 1, closed role. Users in the application of masks, facial skin will be isolated from the outside air, this closed environment will, on the one hand, inhibit the volatilization of water in the skin stratum corneum, on the other hand, will increase the stratum corneum endogenous hydration, so that the skin is soft and smooth.
• 2. Transdermal absorption. Transdermal absorption of cosmetics refers to the effectiveness of the functional components of cosmetics according to the product on the skin surface or into the epidermis, dermis and in the accumulation of the site and play a role in the process. There are two main ways and processes of transdermal absorption of cosmetics: the first is directly from the epidermis into the dermis or dermal tissue; the second is through the skin accessory organs (hair follicles, sweat glands and sebaceous glands) into the dermis or subcutaneous tissue.
• 3, cleaning effect on the basis of the above role, applying the mask can make the skin keratin softening, pore expansion, better adsorption of skin secretions and dirt, so that it is accompanied by the mask removed together, the skin is clean.
• 4, peeling mask: peeling mask raw materials include film-forming agent, moisturizing agent, powder raw materials, solvents, thickening agent, active ingredients and so on. Among them, the film-forming agent is the key component of the peeling mask, usually using water-soluble polymer compounds, because it not only has good film-forming properties, but also has a thickening, emulsifying and dispersing effect on the substrate containing inorganic powder has a stabilizing effect, but also has a certain degree of moisturizing effect. Preparation process: first polyvinyl alcohol, Carbopol941 and other powdered water-soluble polymer compounds with humectant or ethanol wetting, and then add deionized water, stirring under the heat to make it dissolve uniformly; flavors, preservatives, etc., with the remaining ethanol or humectant dissolved, to be added when the temperature drops to 50 ℃, and then add the range, cooled to 35 ℃ can be. Mud masks are targeted at people who are neutral, oily or prone to acne. Its function is to absorb excess sebum, minimize pores and act as an astringent, removing dead skin cells and dirt that clog pores.
• 5, clay film mask matrix is mainly clay, such as bentonite, talc, magnesium oxide, volcanic ash, river silt, titanium dioxide, kaolin, colloidal oatmeal powder and so on. Advantage of the formula: moisturizing cleansing mud mask, fine and light powder, can be upgraded to blackhead removal mud mask
• 6, patch mask patch mask as the mainstream mask, usually a combination of non-woven + mask liquid, pasted on the face, the formation of a layer of barrier, the temperature rises the membrane cloth gradually dry, you can make the pores slowly expanding, the active ingredients into the skin, moisturizing and nutritional effects.

Formulation Advantage:

Superior Silky Moisture Feeling Remarkably moisturized and smooth, fast absorbing, refreshing and non-sticky Skin is soft and supple after absorption.

Preparation process:

• 1. Disperse phase A into a homogeneous solution and heat up to 85° C for 10 min.
• 2. Weigh the phase B and stir to raise the temperature to 70°CC to a homogeneous solution.
• 3. Add phase C to phase B and mix.
• 4. Phase A cools down to 60’C and then add phase B+C and mix well.
• 5. Cool down to 50℃C and add phase D and mix well.
• 6. Cool down to 45℃ and add the pre-mixed E phase and mix well.

*Disclaimer: The content contained in this article comes from the Internet, WeChat public numbers and other public channels, and we maintain a neutral attitude toward the views expressed in the article. This article is for reference and exchange only. The copyright of the reproduced manuscript belongs to the original author and the institution, and if there is any infringementPlease contact Jetson Chemical for deletion