Welcome to Guangzhou Jixun Technology Development Co.

捷迅科技

The use of 84 disinfectant, the ratio and precautions

The use of 84 disinfectant, the ratio and precautions

(I) 84 disinfectant introduction.

84 disinfectant is a highly effective disinfectant, direct contact can burn the skin, import is strictly prohibited, and protective gear such as rubber gloves should be worn during use. It is mainly used for wiping toys, objects and desktops, spraying rooms, mopping floors and mixing with feces.

(II) Simple preparation ratio.

1、1:500 of 84 disinfectant preparation

Clearwater500 g2500 g5000 g10000 g
84 disinfectant1ml5ml10ml20ml

1、1:200 of 84 disinfectant preparation

Clearwater500 g2500 g5000 g10000 g
84 disinfectant2.5ml12.5ml25ml50ml

(III) Formulation method.

  1. Wear anti-corrosion rubber gloves.
  2. According to the preparation ratio, disinfection water arrives well marked on the disinfection bucket according to the number of disinfection items.
  3. Wash and set aside the items to be disinfected.
  4. Use a disinfection bucket to collect cool water to the designated mark and pour the measured amount of 84 disinfection solution into the bucket and stir gently by hand to complete the preparation of the disinfection solution.
  5. Place the cleaned items in the prepared disinfectant solution, cover and soak for 30 minutes.
  6. After 30 minutes, disinfected items are removed one by one and rinsed under clean water and dried in a designated area.
  7. The remaining solution containing 84 disinfectant can be used for soaking rags, cleaning floors and toilets, etc.
  8. Gloves are removed and disinfection is complete.
  9. Make disinfection records.
84 disinfectant use precautions
84 disinfectant use precautions

(IV) Precautions for use.

1. 84 disinfectant is irritating and corrosive and must be diluted before use. The general dilution concentration is 1:500 and 1:200, and the soaking time is 10 to 30 minutes. The disinfected items should be completely submerged in water and should be rinsed with water before use.

2. 84 disinfectant has a strong bleaching and corrosive effect, so it is best not to use it for the disinfection of clothing and iron objects, and when it must be used, the concentration should be low and the soaking time should not be too long.

3. 84 disinfectant is a chlorine disinfectant, and chlorine is a volatile gas, so the container of disinfectant must be covered with a lid, otherwise it will not achieve the effect of disinfection.

4. Do not mix 84 disinfectant with other detergents or disinfectants because this will increase the concentration of chlorine in the air and cause chlorine poisoning.

5. 84 disinfectant is generally valid for 1 year, so we should pay attention to the production date when purchasing and using it, as the effective chlorine content decreases when it is left for too long and affects the disinfection effect.

6. 84 disinfectant is irritating to the skin and gloves should be worn when using it to avoid contact with the skin.

7. 84 disinfectant should be prepared with cool water for one-time use and should not be diluted with hot water above 50°. It should be stored below 25° and protected from light.

8. Disinfect the cleaned items to dry directly, do not touch other containers again.

*Disclaimer: The content contained in this article comes from the Internet, WeChat public numbers and other public channels, and we maintain a neutral attitude toward the views expressed in the article. This article is for reference and exchange only. The copyright of the reproduced manuscript belongs to the original author and the institution, and if there is any infringementPlease contact Jetson Chemical for deletion

Share:

NEWS

Related News

Silicone defoamer applications

Silicone defoamer is a commonly used chemical substance in a wide range of applications. Its main role is to reduce or eliminate the formation of air bubbles in the liquid, thus improving the stability and quality of the liquid. The following small talk about the application of silicone antifoam agent. A textile printing and dyeing

环氧树脂

What are the epoxy resin curing agents used in the wind power industry?

In the wind power industry, epoxy resin is now widely used in wind turbine blade materials. Epoxy resin is a high-performance material with excellent mechanical properties, chemical stability and corrosion resistance. In wind turbine blade manufacturing, epoxy resin is widely used in the structural parts, connections and coatings of the blade. In the parts of

Compounding Properties of Cationic Surface Actives in Anionic Systems

There are many determinants of the effect of anion-cation surfactant compounding on surface activity, and there is a synergistic effect in the case of suitable structure of both parties. In the mixed system of anion-cation surfactants, due to the strong electrostatic attraction of positive/negative ions between molecules, it is easy to form a rod-shaped colloid

Classification and properties of green surfactants

Surfactants are indispensable additives. Adding a certain amount of surfactant solvents to detergents can enhance their solubility and detergency, but due to their toxicity, they can cause significant skin irritation. The use of surfactants in large quantities is also potentially harmful to the ecosystem. In order to meet the increasing demand for health care and

Scroll to Top