TOC COD remover
TOC, COD remover does not contain any shielding agent or interfering agent. Removal rate: 50-80%. Determined by combustion method “HJ501 -2009” Specification: 200g / 500g / 20Kg blue plastic drum.
Typical features
The product utilizes nano-photocatalytic technology and micro-electrolysis technology to efficiently decompose and settle organic matter in water to achieve rapid and effective reduction of TOC/COD. It is highly adaptable to the changes of raw water temperature, PH value, turbidity, alkalinity and organic content, and has good effect on removing TOC/COD in water. The product is a collection of advanced oxidation, reaction and sedimentation, adsorption and other processing technologies, containing high iron ions can be quickly oxidized decomposition of TOC/COD in sewage from the water body, especially for wastewater after biochemical treatment can not meet the standards of the discharge of the enterprise, is the first choice of wastewater treatment of TOC/COD exceeding the standard pharmaceuticals.
Highly efficient treatment of various types of wastewater
There are treatments for garbage, restrooms, smoke odors, exhaust, farms, and sewage
Laboratory test methods
The product is corrosive, the operator needs to wear good protective gear to ensure the safety of operation Before use, please carry out a small test experiment in the laboratory to confirm the use of the effect and dosage, according to the test results, and then determine the adjustment of the amount of additives.
-
- Take 1000ml of wastewater
- Adding sewage treatment agent 1000-1500ppm
- Stir for about 10 to 15 minutes to allow the agent to fully react
- Detecting water quality after sedimentation and filtration TOC/CoD
How to use on site
The product is corrosive, operators need to wear good protective gear to ensure safe operation Dosage: general continuous sewage treatment system processing, wastewater dosage of the product 1000ppm/T, the specific dosage according to the wastewater content of TOC/COD and through the test to determine; the product will be used in the process of sediment production, the best use is in the air flotation process to use, and the follow-up process to strengthen the sediment The best use of the product is in the air flotation process, the subsequent process to strengthen the separation of sediment, to achieve the best effect of removing TOC/COD; Conditions of use: the applicable wastewater PH value range of 6.7-7.8, depending on the quality of the raw water to add environmental testing after the addition of a better effect, such as biochemical treatment processes, the requirements of biochemical reaction after the addition;
PH value addition environment
The addition of different PH value needs to be different according to the form of raw water produced Wastewater treatment agent products can be added to a wide range of environments, depending on the quality of raw water experiments to obtain the best environment for the addition. PCB mainly comes from the TOC/COD in the ink wastewater, its raw water to add the environment can be added when the PH is 7-8; when mixed into the water, can be added after flocculation and precipitation PH value of 6.5-6.8; chemical plant production process of raw water produced by the system after treatment (biochemical treatment) to add the PH value of 6.5-8 can be added; hardware plating It can be added when the pH value of the sewage is 6.5-7.
Appearance | Dark brown liquid |
quantity contained(%) | 45 |
Density (g/cm3) | 1.22 |
PH | 2-3 |
Package specification
- Specification: 200g / 500g / 20Kg blue plastic drum
- There will be a small amount of precipitation after the product is stored for a long time, which needs to be stirred evenly before use and does not affect the use effect.
- The product contains strong oxidant components, please do not mix with reducing agents.