D2101A defoamer
D2101A defoamer composition is hydrophobic silica. It can be used in coatings, emulsion polymerization process and foam control of adhesives, and has notable performance in acrylic, PVA and natural adhesives. MG-D2101A is compatible with SBR, PVA, acrylic, PVC and NBR emulsions. Available in sizes: 200g / 500g / 20kg
Typical features
- Pre-emulsified, 100% active ingredient.
- Optimal balance of defoaming capacity and compatibility.
- Excellent performance in the polymerization process.
Product Use
Defoamers are widely used, such as food industry, paper industry, water treatment, oil industry, printing and dyeing industry, coating industry, detergent industry, rubber latex industry, aerosol industry, daily chemical industry, pharmaceutical industry, dairy industry and so on.
Quality Indicators
| Item | Indicator |
| Appearance | Opaque liquid |
| Flash Point | ≈196 |
| Density | 0.92 |
| NDJ Viscosity | 1500-3000cps |
How to use
The amount of D2101A defoamer added can be about 0.1-0.3% of the total weight of the system, the actual amount depends on the demand of the system, add half of the defoamer in the process of pigment dispersion, the remaining half will be added in the thinning process.
Package specification
- Specification：200g / 500g / 20kg
- This product is not dangerous goods, and can be transported as general cargo.
- Non-toxic, non-combustible, sealed and stored in a cool, ventilated and dry place indoors.
