Water-based light-curing resin UV-32X50
- Waterborne light-curing resins are mainly four-functional waterborne acrylic synthetic resins. The resin has high solid content, slightly hard overall, fast curing speed and good surface drying effect. It has good adhesion to plastic, wood and surface.
- Non-polluting, low odor, low toxicity, non-combustible
- It can be used with water, initiator, auxiliaries, etc. alone, or with water-based or oil-based monomers or resins according to performance requirements, and used with initiators, auxiliaries, etc.
- Suitable for UV varnish, PET varnish, paint, ink, etc.
Typical features
- Good adhesion to plastic, wood, etc.
- Excellent alcohol resistance
- Good water resistance
- Good water solubility and dilutability
- Good wettability and sandability for pigments
- High hardness
- Good compatibility with water
Product Use
- Water-based UV ink, varnish
- Water-based UV coatings, wood coatings, industrial coatings (metal coatings)
Quality Indicators
| Solid % | 98% |
| Brinell Viscosity at 25℃ , cps(Brookfeld, LVT No.4,64 RPM) | 6000~9000mpa,S |
| pH value | 8.0-9.0 |
| Appearance | Light yellow transparent liquid, no odor |
| Glass transition temperature Tg, °C | 60 |
| Boiling point | 120°C |
| Flash Point | 160℃ |
| Density | 1.15g/mm³ |
How to use
| Water-based wood UV varnish | |
| UV-32X50 | 55% |
| Initiator 1173 | 6% |
| Triethanolamine | 2% |
| Ionized water | 35% |
| Leveling agent | 1% |
| Wetting agent | 0.3% |
| Defoamer | 0.2% |
| Wear-resistant wax | 0.5 % |
Package specification
200g/500g/ 20kg This product is not dangerous goods, and can be transported as general cargo.
Storage conditions
- Products should be stored in airtight containers, avoid freezing and high temperature
- Whenever possible, it should be used within ten months
- The recommended normal storage temperature is 10-35℃
