Cutting fluid wastewater emulsion breaker JMX-36
Wastewater emulsion breaker belongs to polymer, can be emulsified oil in water, colloid flocculation separation and sedimentation; in the water at the same time can be adsorbed charge.
Store in a cool, dry, well-ventilated warehouse
Specification:200g/500g/5kg/25kg
Quality Standards
Appearance | Yellowish brown liquid |
Density | ≥1.15 |
pH (1% solution) | 3.5-5.0 |
freezing point | ≥-5℃ |
water-insoluble substance | ≤0.2% |
Product Use
Emulsion breaker is a multi-functional flocculant that can break emulsion, decolorize, remove heavy metals, remove COD, etc. It is mainly used for purifying industrial wastewater, and also used for special water quality treatment of feed water, removing iron, cadmium, fluorine, radioactive pollution, and oil. It is also widely used in hardware, printing and dyeing, casting, papermaking, medicine, cleaning, petrochemical, tanning, etc. Translated with www.DeepL.com/Translator (free version)
Recommended addition of 0.1-3%.
The actual amount to be added should be determined after experiments according to the COD value of the effluent to be treated and the condition of the material.
Other
- This product is not dangerous goods, and can be transported as general cargo.
- It is recommended to store in a cool, dry and well-ventilated storage room.
Mail to us
Just fill out the form below and send it to us!